彩票|大赢家首页

                            180
                            SSAB Laser 275C

                            SSAB Laser® 275C

                            Advanced hot rolled structural steel for cold forming, optimized for laser cutting, with a minimum yield strength of 275 MPa.

                            SSAB Laser® 275C is nicely positioned between SSAB Laser® 250C and SSAB Laser® 355C and could be just the steel you need for your products. SSAB Laser® 275C is the result of total production process control. Its consistent chemical composition, with low sulphur, phosphorous and silicon and the perfected hot rolling process result in a uniform and smooth microscale surface for optimal laser cutting.

                            SSAB Laser® 275C is dead-flat. Flatness, before and after laser cutting, is guaranteed to ≤ 3.0 mm/m.

                            SSAB Laser® 275C meets and exceeds the requirements of EN 10025-2 for S275J2C+N. Dual material certification and CE marking is available upon request. The SSAB Laser® dimensional tolerances exceed the requirements of EN 10051 for hot rolled sheet and EN 10029 for thot rolled plate.

                            The SSAB Laser® product family consists of hot rolled plate and sheet and cold rolled sheet with yield strength levels up to 460 MPa. All products benefit from superior steel cleanliness, well balanced and consistent chemistry, optimized for laser cutting and narrow and consistent dimensional tolerances


                            Dimension Range

                            SSAB Laser® 275C is available in thickness 2.00 - 30.00 mm and widths up to 1860 mm as cut to length and 3300 mm as plate. Length up to 16 meters as cut to length and 15 meters as plate.

                            Available Standards

                            EN 10025-2

                            EN 10051

                            EN 10029

                            SSAB Laser® 275C

                            SSAB Laser® 275C

                            USED FOR
                            DIMENSIONS
                            STANDARDS
                            DATA SHEET
                            USED FOR

                            Laser cutting

                            Structural

                            DIMENSIONS

                            T: 2 - 30 mm

                            W: Up to 3300 mm

                            L: Up to 16000 mm

                            STANDARDS

                            EN 10025-2

                            EN 10051

                            EN 10029

                            DATA SHEET

                                                      reading

                                                      Variety show

                                                      Second-hand housing

                                                      Second-hand housing

                                                      Foreign exchange

                                                      Mobile phone

                                                      entertainment

                                                      Second-hand housing

                                                      Buy a car