彩票|大赢家首页

                            180
                            SSAB Laser 355C

                            SSAB Laser® 355C

                            SSAB Laser® 355C

                            SSAB Laser® 355C has the highest minimum yield strength level of the SSAB Laser® hot rolled structural steels for cold forming and is the optimal steel for laser cutting. SSAB Laser® 355C takes full benefit of total production process control. A well-balanced and consistent chemical composition with low sulphur, phosphorous and silicon in combination with the perfected hot rolling process results in a uniform and smooth microscale surface for optimal laser cutting.

                            SSAB Laser® 355C is dead-flat. Flatness, before and after laser cutting, is guaranteed to ≤ 3.0 mm/m.

                            SSAB Laser® 355C meets and exceeds the requirements of EN 10025-2 for S355J2C+N. Dual material certification and CE marking is available upon request. The SSAB Laser® dimensional tolerances exceed the requirements of EN 10051 for hot rolled sheet and EN 10029 for hot rolled plate.

                            The SSAB Laser® product family consists of hot rolled plate and sheet and cold rolled sheet with yield strength levels up to 460 MPa. All products benefit from superior steel cleanliness, well balanced and consistent chemistry, optimized for laser cutting and narrow and consistent dimensional tolerances

                            Dimension Range

                            SSAB Laser® 355C is available in thickness 3.00 - 30.00 mm and widths up to 1860 mm as cut to length and 3300 mm as plate. Length up to 16 meters as cut to length and 15 meters as plate.

                            Available Standards

                            EN 10025-2

                            EN 10051

                            EN 10029

                            SSAB Laser® 355C

                            SSAB Laser® 355C

                            USED FOR
                            DIMENSIONS
                            STANDARDS
                            DATA SHEET
                            USED FOR

                            Laser cutting

                            Structural

                            DIMENSIONS

                            T: 3 - 30 mm

                            W: Up to 3300 mm

                            L: Up to 16000 mm

                            STANDARDS

                            EN 10025-2

                            EN 10051

                            EN 10029

                            DATA SHEET

                                                      Super League

                                                      aviation

                                                      explore

                                                      Blog

                                                      news

                                                      Celebrity

                                                      explore

                                                      aviation

                                                      Real estate