彩票|大赢家首页

                            180
                            Duroxite 200 Wire
                            Duroxite 200 Wire

                             

                            DUROXITE® 200 WIRE

                            YOUR SOLUTION FOR WEAR AND HIGH IMPACT

                             

                            For severe abrasive wear and moderate impact.

                            The latest addition to the Duroxite® family is Duroxite® 200 WIRE, which is a flux-cored welding wire for hardfacing various components.

                             

                             

                            Contact UsDownload brochure

                            ""

                            Supreme strength wire with optimal alloy formula

                            Duroxite® 200 WIRE is designed for applications with severe abrasive wear and moderate impact up to 600°C (1100°F).

                            Duroxite® 200 WIRE forms overlay with primary chromium-rich carbides with co-existing refined multi-alloy carbides which provide a good combination of wear and impact resistance.

                            ""

                            Superior ease and flexibility of repair

                            Duroxite® 200 WIRE is mainly used for capping, routine maintenance or repair work. It can be welded on mild steel, Q&T steels, cast materials and stainless steel. Duroxite® 200 WIRE is easy to apply on site or in the workshop. The application of Duroxite® 200 wire can be done quickly in all position application that allows welders to weld upside down.
                            ""

                            Examples of applications

                            Sand and earthmoving equipment such as buckets and teeth, railway ballast tampers, dredge buckets and lips, dragline buckets, coke hammers, rippers, sizing screens, crushing equipment, brick industry components, Muller tires, catalyst lift pipes, pump impellers, fan blades, rockwool rolls, wear plates operating at high temperature in the steelmaking industry.
                            SSAB Duroxite 500 Uptimers

                            Extend your wearparts lifetime with Duroxite® 200 WIRE

                            Duroxite® 200 Wire

                            Duroxite® 200 Wire

                             Standard Diameter

                             Metric

                            Imperial

                               1.2 mm  0.045’’
                               1.6 mm  1/16’’
                               2.8 mm  7/64’’

                                     ASTM G65 – Procedure A weight loss 1)

                             Number of overlay passes

                            Surface            

                            75% depth of overlay 2)

                             Multiple passes  0.12 g maximum  0.12 g maximum

                            1) ASTM G65 is a standard test measuring sliding abrasion resistance using a dry sand/rubber wheel apparatus. ASTM G65-Procedure A is the most severe test method.
                            2) ASTM G65 wear test is conducted at 75% depth of the overlay materials to ensure consistently good wear resistance from the top surface through to the depth of 75% of
                            the overlay.

                             Classifications

                             DIN 8555: MF 10-GF-65-GRT

                             

                            Typical all-weld metal chemical composition (wt. %)

                             C  Mn  Si  Cr  Nb  Fe
                             5.3  0.5  0.2  22.0  6.5  Balance

                             

                            Typical all-weld metal surface hardness 1)

                            Three-layer deposit on mild steel: 62–67 HRC
                            1) Surface hardness is measured on machined flat surface just below overlay surface.

                             

                            Typical all-weld metal surface hardness

                            Rockwell C hardness (HRC)

                             Single pass  57-60 HRC
                             Double pass  60-65 HRC

                             

                            Welding conditions

                             Current type

                            Shielding gas

                            Welding positions

                             DCEP (Direct current electrode positive)  None (Self-shielded)  Flat, half up, half down

                             

                            Welding parameters

                            Diameter Amperage (A) Voltage (V) Stick - out
                            Range
                            Optimum
                            Metric Imperial Range Optimum Range Optimum Metric Imperial Metric Imperial
                            1.2 mm 0.045’’ 150–200 180 25–30 28 10 mm–20 mm 3/8’’–3/4’’ 15 mm 5/8’’
                            1.6 mm 1/16" 150-270 200 24-27 25 20 mm - 40 mm 3/4" - 1 - 5/8" 25 mm 1"
                            2.8 mm 7/64’’ 290–310 300 29.5–30.5 30 15 mm–25 mm 5/8’’–1’’ 20 mm 3/4’’
                            Recovery: 90%

                            Standard package

                             Diameter

                             Weight

                            Type

                             Metric

                             Imperial

                             Metric

                            Imperial 

                             Spool 1.2 mm 0.045’’  15 kg  33 lbs
                             Spool 1.6 mm  1/16’’  15 kg  33 lbs
                             Spool 2.8 mm 7/64’’  25 kg  55 lbs

                            The welded overlay components can be processed by welding, cutting, forming and machining. Specific recommendations can be found in the Duroxite Product brochure or by consulting your local technical support representative.

                            Duroxite contact form

                             

                            By submitting this form, you give SSAB permission to process your personal data, and accept SSAB’s privacy statement. We always follow the local data processing regulations.

                                                      mailbox

                                                      education

                                                      reading

                                                      mailbox

                                                      news

                                                      aviation

                                                      game

                                                      aviation

                                                      mailbox